How To Solve The Rolling And Sliding Of Belt Conveyor?

When conveying materials by belt conveyor, we will encounter the trouble of material rolling and sliding. In order to ensure that the belt conveyor can deliver materials safely, let's explain how to prevent material rolling and sliding.
When conveying materials, belt conveyors often encounter the trouble of material rolling and sliding. In order to ensure that the belt conveyor can safely express materials. Let's explain how to prevent material from rolling and sliding.
Prevent material from rolling and sliding. The reason for material stability of belt conveyor is whether the friction between material and belt is greater than the falling force of material gravity.
1. The usual measures are to increase the pressing type of auxiliary belt, increase the deep groove idler group at the side roll groove angle, and add the anti-roll device type. The pressure belt conveying is to exert pressure on the material through the auxiliary belt to produce sufficient friction resistance, prevent the material from rolling, realize the stable operation of the material and improve the conveying angle. Due to the complex structure, high manufacturing cost, uneven raw coal flow and other factors, the application is limited. The deep groove conveyor squeezes the material by increasing the side roll groove angle, thus increasing the friction between the material and the conveyor belt. And increase the internal friction between materials to achieve the purpose of increasing resistance, anti-skid and stable transportation.
2. Its structural form: single (double) beam, double row V-type four-roll structure, bottom V-roll groove angle of 250, large side roll angle to improve material accumulation depth; Extend the length of the side roll and increase the holding length of the idler to the material. In order to prevent large pieces of material from floating on the broken material surface in the conveyor belt and rolling a small amount of single pieces of material in the logistics on the belt, a flexible anti-rolling device is adopted. It is composed of flexible curtain, deviation resistance roll, door frame, etc. The installation spacing is generally about 20cm.