Bayrich Air Cooled Press Machine

Bayrich air cooled press machine

FEATURES :

The Bayrich air cooled press,have different models for width from 900 mm to 2100 mm

1.Used for pvc belt etc.thermoplastic belt materials portable splice press,light weight and with flight case as standard packing,is easily removed to any where for job site use

2.Fast splicing:include heating time and cooling time,only 9-12mins.

3.All In one design:the press has an integrated air-cooling system and also air compressor inside,to ensures that the belt is quickly cooled down and auto press on,without water pump or additional air compressor.

4.Light weight

5.Easy to use and assemble,how to operate

6.Reliable and automatic temperature control with time control (in one meter,also you can set by yourself),air pressure controller (set the air pressure and display the current pressure)

Voltage:220v or 380v,if special voltage pls freely to form us

Flight Case

1.The air cooled press are supplied with a flight case for both

storage purposes and also for easy transport to on-site jobs.

2.Place press in the flight case so the end with the power receptacles is facing the storage compartment.This will protect the receptacles from damage when transporting.

3.Flight case are packaged with wheels and an extension handle.

4.Flight cases can be stacked on top of each other, but need to be secured during transportation.

5.Flight cases feature an extended handle for ease and convenience in transport.Click in the grip of the flight case to release the handle.

Pre-heating System

If belt is relatively thick,a problem might occur where the outside of the belt is at the splicing temperature too long,waiting for the inside to reach the required temperature.Melted material might flow away or discolor and fabrics might shrink.To avoid this problem,the preheat option can be used.This option heats the belt up (outside and inside)to a temperature just below the melting temperature.After the preheat stage,the inside splice temperature can be reached

much quicker,minimizing the risk for unwanted flow of material,discoloring or shrinkage.