What Kinds Of Conveyor Belt Splicing Machines Are There?

Now there are two kinds of splicing machines: one is water-cooled hot press machine, and the other is air-cooled all-in-one machine.
Water-cooled hot press: Required equipment Hot press body, temperature control box, water pump, air compressor.
After the belt is toothed in layers, heat and vulcanize both ends of the belt teeth on a water-cooled hot press to completely close the belt interface, and the machine will automatically start the water pump for cooling.
Air-cooled all-in-one machine: It is a relatively advanced type of joint equipment at present.
After the belt is layered and toothed, the two ends of the belt tooth head are heated and vulcanized on the air-cooled machine, so that the belt interface is completely closed. The body has a fan cooling system. After the heating is completed, the fan will automatically start cooling. This machine It is more convenient, and it also greatly shortens the joint time and improves the efficiency.