Manual Flat Belt Grinding Machine

Name: China Manual Flat Belt Grinding Machine Manufacturers Suppliers Factory - Made in China - Bayrich Safety Equipment
Brand: Bayrich
SKU: 199396909

Bayrich Manual grinding machine a preparing device for skiving of flat belts or spindle tape up to a width of 500 mm and a thickness of 6 mm.
After the flat belt or spindle tape is cut, the next step is to grind the ends. Both ends should be grind for adhesive overlap. The grinding ends process of the flat belt production is also extremely important. If the two ends of the grinding parts are uneven, it will directly affect the poor lapping, and the belt is easy to break when the machine is used; The uneven joint may also lead to problems such as deviation and run out during the use of the endless transmission belt.

Send Inquiry

Description

Feature

Stable operation and convenient operation.
The grinding head is flat and the grinding thickness is accurate.
The length and gradient of grinding head can be adjusted within a certain range.
For a Maximum belt width 500mm and thickness 6mm.

Technical Datasheet

Model	GM1015	GM1320	GM1530	GM1540	GM1550
Maximum belt thickness	4mm	6mm	6mm	6mm	6mm
Maximum grinding length	100mm	130mm	150mm	150mm	150mm
Maximum grinding width	150mm	200mm	300mm	400mm	500mm
Voltage	220V	220V	220V	220V	220V

Machine Detail

Bayrich manual flat belt grinding machine Manual pushing, abrasive belt grinding roller.

The belt is clamped and stuck on a steel table. This table is adjustable in tilt and is fed under a grinding drum on precise guides.

The grinding drum is driven by a powerful three-phase electric motor; feed is by means of aself-contained two-speed electro-hydraulic drive. A nonadjustable fast one for in-feed and an adjustable for slow-working speed.

This feed gives smooth automatic and productive operation.No operator intervention is necessary during the skiving process.

The result of this operation is a precise skiving, even on the most demanding belt products. This grinding machine especially suitable for preparation of Thermofix joints of power transmission belts in the fabrication workshop in large series.