Splicing of ultra-wide conveyor belt

Normal width

In China The production line of raw materials of PU PVC conveyor belt is usually 2 meters and 3 meters, so the width of conveyor belt that we normally see is within 3 meters. There are some special customized products that can also be made into 4-meter rolls.

On this basis, Current belt joint splicing machine maximum is about 4200mm. Like below Bayrich water cooled press machine we have done.

Ultra-wide conveyor belt

The actual production of ultra-wide conveyor belt is feasible. But if you need a belt width more than 4meters.How can we splice it ?

As long as the site is sufficient, the conveyor belt can be spliced and hot pressed, Generally, the splicing method is heating the joint in the width direction of the conveyor belt and then to joint the belt into endless.

With the improvement of automation, there are many industries using ultra-wide conveyor belt, such as metallurgy industry, textile industry, Non-woven fabric production equipment, Sports training equipment, etc...

After years of accumulation, we have solved the problems such as easy deviation and poor lateral stability of ultra-wide conveyor belt. Our current production record is the connection of the 8-meter-wide conveyor belt.