Manual Finger Punching Machine
Bayrich manual finger puncher is designed to punch fingers on the ends of lightweight thermoplastic conveyor plies as a preparation for making finger- or finger-over-finger splices.
As mentioned before on the pneumatic finger punching machine page. Finger punch is a must step before conveyor belt splicing process.
Because of the easy set-up and manual operation, the Bayrich manual finger puncher is an ideal tool for working on location. The maximum thickness is up to 5 mm for light weight belting.
Description
Feature
- Light weight, portable, easy to carry. Suitable for working in various environments especially on-site work. Work at height and narrow place is also possible.
- Simple structure and convenient operation by puller the handle.
- A variety of finger shapes can be punched by replacing the cutting plate. Single finger. Finger over finger and bias finger.
- Belt width is unlimited, and small machines can also widen the belt.
- Save energy without electricity and air supply.
Technical Datasheet
Bayrich manual finger puncher machine standard model is: 300mm/600mm/900mm/1200mm/1500mm.
Although all punch boards of the manual finger punching machine have a specified net width, the open construction of the frame allows belts of larger widths to be punched with these machines.
With one layer punch, usually use 15*75mm finger and on 20*50mm fngers for finger-overlap-fnger splicing. It is also possible for a bias finger punching.
If you need other size of the finger, Please contact with our sales people.
Machine Detail
Bayrich Manual finger puncher is manually operated and does not need electricity or air pressure for its operation. The punching force is created by pulling the lever and is easily done with one hand by an average person.
Punching Head -- Aluminum alloy
Punching Head -- Aluminum alloy
Latches -- Double Finger
Pressure Regulator
Belt Clamp Device
Belt Clamp Device
Optional Accessories
Finger Board (15*75, 20*80, 20*60 etc)
FAQ
commen questions about bayrich manual finger punching machine
Q:1.Why do we need to finger punch for the conveyor belt?
A:PU PVC conveyor belt with a maximum thickness of about 5mm
Q:2.What are the suitable occasions for using a manual finger puncher machine?
A: It is Suitable for bringing to onsite joints or using for punching small quantities in the factory
Q:3.What is the maximum thickest conveyor belt that can be finger punched by a manual finger puncher?
A:Yes, finger over finger punch is possible for the manual finger punching machine .
Q:Can the cutting plates be sold separately?
A:Sure, you can purchase our standard cutting plate separately for 15 * 75 and 20 * 50 fingers, or customize according to your requirements.
Q:5.Can a manual finger puncher machine make finger over finger punch?
A:Computer Numberical Control (CNC) machining is a manufacturing process in which pre-programmed computer softeare dictates the movement of fact`ory tools and machinery. The process can be used to control a range of complex machinery, from girnders and lathes to mills and CNC routers.
Q:6.Can a manual finger punching machine make angle cut?
A:Sure. Angle of 75 degrees and 70 degrees, can also be customized according to needs.
Q:7.Where shall we start to cut is better to make the fingers?
A:It is better Start punching from the middle,thus the belt will be not moved .
Hot Tags: manual finger punching machine, China manual finger punching machine manufacturers, suppliers, factory, buckle machine, belt hot vulcanizing machine, endless belt fabrication machine, fastnener mechanical machine, Belt slitting machine, conveyor belt splicing tools
