Timing Belt Joint Press

For most opening PU timing belts, there are three joint methods:

Mechanical joint: Generally refers to the use of belt fastener joint. This joint method is convenient and economical, but the efficiency of the joint is low and easy to damage, which has a certain impact on the service life of pu timing belt products.

Cold bonded joint: The joint is made with cold bonded adhesive. This joint method is more efficient and economical than mechanical joint, and should have better joint effect. However, in practice, it is not very stable because the process conditions are difficult to master and the quality of adhesive has a great impact on the joint.

Hot pres joint: PU timing belt joint has proved to be the most ideal joint method in many years of actual combat, which can ensure high joint efficiency, but also very stable, long joint life and easy to master.

Bayrich timing belt joint machine helps you to do the splicing work more easily.

1. Belt width: Standard 100/150/200mm, other size to be ordered

2. Heating Platen Size: 200*200mm for 200mm width belt

3. Minimum Belt Perimeter: 850mm

4. Voltage: 2200V, Single Phase or as optional

5. Power: 7.1KW

6. With Pneumatic Pressure System, Air Pressure: 0.6Mpa

7. Temperature Range: 50-230 ℃

Bayrich timing belt joint machine includes a frame and a connection working part installed on the frame, connection working part includes a fixed lower plate and an upper platen, and the fixed lower plate is clamped with a first heating plate; the upper platen is clamped with a first heating plate, and its stop end is also equipped with an oil cylinder and a guide column, and the upper platen can expand up and down through the said oil cylinder and guide column.

The connecting work of the timing belt joint machine is realized through the upper platen driven by the push-pressed metal structure and the fixed lower plate as the fixed base surface.

The structure is simple and simple, the heating plate are equipped with a water circulation cooling channel and a temperature sensor connected with the channel, which further facilitates the control of the temperature during the hot splicing , Make the hot press work more stable and efficient, and better ensure the quality of the hot spliced timing belt.

Barometer and Heating Platen

Heating System

Control Panel

Welding Mould

1. Timing Belt Jointing Mould (Belt width adjustable).

2. Self-Circulation Water Cooling System.

3. Hydraulic Pressure system (Intead of pneumatic pressure system.

Welding Mould (According to your belt type, 25~200mm width)

Hot Tags: timing belt joint press, China timing belt joint press manufacturers, suppliers, factory, Timing Belt Finger Cutting Machine, timing belt punching machine, automatic timing belt slitter, timing belt splice machine, timing belt hot splicing machine, industrial belt slitting machine